Svenska English Test Pressing – Feedback Test Pressing Feedback Fill in the form to evaluate your test pressing and report any issues. Checklist before reporting Clean the record of dust and static electricity. Test on at least two different turntables. Make sure the stylus is clean, undamaged and that the tracking force/anti-skating is set correctly. Check whether the same issue occurs on all test pressings. Record information Label / Publisher Artist Title Catalogue number / Reference Email address Track order Are all tracks in the correct order? Yes No Describe the track order issue Test environment check Have you tested the record on at least two turntables? Yes No You need to test on at least two turntables to make sure the issue is not caused by a single piece of equipment. Do you experience the same issue on all test pressings? Yes No Check all test pressings in order to distinguish a one-off issue from a fault that occurs consistently throughout the pressing. Report audio issues Vinyl is an analogue medium. Minor variations and light background noise can occur. Side Select... A B C D Track Time code Description of the issue + Add issue to the list Added issues (0): Information about common audio issues Clicks/crackle: Often caused by dust or static electricity. Skipping: Check the tracking force, anti-skating and that the stylus is not worn. Distortion: May be caused by your settings or by so-called inner groove distortion. Send feedback by email